NYLON

Note that these instructions are based on heat presses supplied by Imagine

Position the garment on the fusing bed of your heat press ensuring that the printable area of the garment is straight, free from buttons, zips, etc. Lightly press the garment to help smooth out any creases. Any particles of hair, dust or cloth should be picked off. At this point the pressure should be adjusted to accommodate the differences in thicknesses of materials.

First pre-heat the garment as follows :

temperature - 160°c
pre-heat time - 15 seconds
pressure - light

Then position the transfer face down onto garment and fuse as follows :

fusing time - 3 seconds
peel Polyester backing - cold

Then place release paper on top of the print and re-press as follows :

pressing time - 10 seconds

The transfer can be washed at 40°. Do not tumble dry, bleach or iron over print.

click here to return to the fusing menu or here to return to the main menu