SUB-X

Note that these instructions are based on heat presses supplied by Imagine

Position the garment on the fusing bed of your heat press ensuring that the printable area of the garment is straight, free from buttons, zips, etc. Lightly press the garment to help smooth out any creases. Any particles of hair, dust or cloth should be picked off. At this point the pressure should be adjusted to accommodate the differences in thicknesses of materials.

Carefully peel the print off of the backing sheet, place between two sheets of release paper then press :

temperature - 185°c
time - 15 seconds (or 10 seconds for 100% nylon fabric)
pressure - light

If fusing onto 100% nylon pre-heat the fabric for 10 seconds

Place transfer on garment with the print side up (most of our other transfers are fused print side down). Cover the print with release paper and fuse the transfer :

temperature - 185°c
fusing time - 15 seconds (10 seconds for 100% nylon fabric)
pressure - light

IMPORTANT - to avoid colour bleed, keep unfused transfers in a dark place and fuse within 24 hours of receipt.

The transfer can be washed at 40°. Do not tumble dry, bleach, dry clean or iron over print.

click here to return to the fusing menu or here to return to the main menu